- EP+XE Cloth
- Sidewall height
- Cleat height
- Steel case
Steep incline conveying from 0 to 90 degree.
No transfer points.
No spillage with steep angle conveying.
Maximum utilization of space.
Minimum maintenance, long belt Life.
Wide range of materials can be handled
Sidewall belting is widely used for bulk material lifting in harbor, metallurgy, tunneling, powerplant, chemical industry, cement and metro, etc.
The conveying capacity can be reached to 6000 m³ / h.
Corrugated sidewall belt require a certain tensile strength and abrasion resistance.
For belt has to have enough cross rigidity and ﬂexibility longitudinally to
meet up with the requirement of deﬂection part of conveyor. The special
designed base belt with cross rigidity solved the problem of belt
deformation. The belt standand are in accordance with international
XE This belt incorporates the transverse polyester monofilament cords
within the fabric, mainly used for small and medium sized applications.
XE+2 The cross rigid and tensioning plies are separate,in this case the
belt has 2 cross-rigid polyester monofilament plies, application areas are
medium to heavy.
XE-SC+2 This belt incorporates textile tensioning plies with closely
pitched and specially designed steel cords. The high lateral stiffness
means the belt can be used in application areas where rigidity is an
important factor, i.e. High lift heights and wide belts.
FRONT sidewalls from type S120/MDSF120 and higher have special diagonal fabric reinforcement in the corrugations as standard,
smaller sidewalls can have this feature if required.
FRONT cleats have been speciﬁcally design to give optimum performance.
FRONT cleats are molded with features of strong stiffness,abrassion resistant
and impact resistance to give the best shape retention even when conveying high-density materials
fabric layer /steel wire layer to ensure the impact resistance.